The Three-Layer Network Design Model

The Three-Layer Network Design Model: An Analysis (+Examples)

 

The campus wired LAN uses a hierarchical design model to separate the network topology into modular groups or layers. Separating the design into layers allows each layer to implement specific functions, which simplifies the network design. This also simplifies the deployment and management of the network.
The campus wired LAN enables communications between devices in a building or group of buildings, as well as interconnection to the WAN and Internet edge at the network core. A hierarchical LAN design includes the access, distribution, and core layers as shown in the figure.

The figure shows two internet clouds at the top. Each cloud connects to two routers, one on the left and one on the right. Below the routers are two layers 3 switches within a box labelled core layer. Each router connects to each of the switches.

 

The switches also have multiple lines between them with a circle around the lines. Below these two switches are two more switches within a box labelled distribution layer. Each of the top switches connects to each of the two switches below them.

 

Below the distribution layer switches are three-layer 2 switches and two access points within a box labelled access layer. Each access layer switch has a connection to each of the distribution layer switches. Each access point connects to just one of the access layer switches.

 

Below the access, layer box are two wireless tablets. Each wireless tablet connects wirelessly to a wireless a p. Also below the access layer box are four IP phones. Each phone has a p c attached. One phone connects to the left access layer switch, two phones connect to the middle access layer switch, and the last phone connects to the last access layer switch.

 

Hierarchical Design Model

Each layer is designed to meet specific functions.
The access layer provides endpoints and users direct access to the network. The distribution layer aggregates access layers and provides connectivity to services. Finally, the core layer provides connectivity between distribution layers for large LAN environments.
User traffic is initiated at the access layer and passes through the other layers if the functionality of those layers is required.
Even though the hierarchical model has three layers, some smaller enterprise networks may implement a two-tier hierarchical design. In a two-tier hierarchical design, the core and distribution layers are collapsed into one layer, reducing cost and complexity.

 

The figure shows two internet clouds at the top. Each cloud connects to two routers, one on the left and one on the right. Below the routers are two layer 3 switches within a box labeled collapsed core. Each router connects to each of the switches. Below the collapsed core box are three layer 2 switches and two access points.
Each switch has a connection to each of the switches within the collapsed core box. Each access point connects to just one of the access layer switches. Below the collapsed core box are two wireless tablets. Each wireless tablet connects wirelessly to a wireless a p. Also below the collapsed core box are four IP phones.
Each phone has a p c attached. One phone connects to the left access layer switch, two phones connect to the middle access layer switch, and the last phone connects to the last access layer switch.
In flat or meshed network architectures, changes tend to affect a large number of systems. Hierarchical design helps constrain operational changes to a subset of the network, which makes it easy to manage as well as improve resiliency. Modular structuring of the network into small, easy-to-understand elements also facilitates resiliency through improved fault isolation.

Firewalls

Typically, a firewall with two interfaces is configured as follows:

  • Traffic originating from the private network is permitted and inspected as it travels toward the public network. Inspected traffic returning from the public network and associated with traffic that originated from the private network is permitted.
  • Traffic originating from the public network and traveling to the private network is generally blocked. 

 

Demilitarized zone

A demilitarized zone (DMZ) is a firewall design where there is typically one inside interface connected to the private network, one outside interface connected to the public network, and one DMZ interface, as shown in the figure.

  • Traffic originating from the private network is inspected as it travels toward the public or DMZ network. This traffic is permitted with little or no restriction. Inspected traffic returning from the DMZ or public network to the private network is permitted.
  • Traffic originating from the DMZ network and traveling to the private network is usually blocked.
  • Traffic originating from the DMZ network and traveling to the public network is selectively permitted based on service requirements.
  • Traffic originating from the public network and traveling toward the DMZ is selectively permitted and inspected. This type of traffic is typically email, DNS, HTTP, or HTTPS traffic. Return traffic from the DMZ to the public network is dynamically permitted.
  • Traffic originating from the public network and traveling to the private network is blocked.

To Get Email Updates when we post new contents, Click Here.

Published by

Adeniyi Salau

Adeniyi Salau is a highly dedicated and committed Blogger of repute. He likes sharing his IT knowledge with others. My desire is to impact as many lives as possible with my IT skills. You can download my mobile APP. Download the ICTLOAD APP on Google Playstore. Thanks.

Leave a Reply

Your email address will not be published. Required fields are marked *

Exit mobile version