The Need For Alert Evaluation In Cybersecurity

Contents

1
- 1.1 Primary Tools for the Tier 1 Cybersecurity Analyst
2 Evaluating Alerts
- 2.1
- 2.2 Fact Check Policy

The threat landscape is constantly changing as new vulnerabilities are discovered and new threats evolve. As a user and organizational needs change, so also does the attack surface. Threat actors have learned how to quickly vary the features of their exploits in order to evade detection. This article talks about alert evaluation in cybersecurity.

It is impossible to design measures to prevent all exploits. Exploits will inevitably evade protection measures, no matter how sophisticated they may be. Sometimes, the best that can be done is to detect exploits during or after they have occurred.

Detection rules should be overly conservative. In other words, it is better to have alerts that are sometimes generated by innocent traffic, than it is to have rules that miss malicious traffic. For this reason, it is necessary to have skilled cybersecurity analysts investigate alerts to determine if an exploit has actually occurred.

Tier 1 cybersecurity analysts will typically work through queues of alerts in a tool like Sguil, pivoting to tools like Zeek, Wireshark, and Kibana to verify that an alert represents an actual exploit.

Primary Tools for the Tier 1 Cybersecurity Analyst

Evaluating Alerts

Security incidents are classified using a scheme borrowed from medical diagnostics. This classification scheme is used to guide actions and to evaluate diagnostic procedures. For example, when a patient visits a doctor for a routine examination, one of the doctor’s tasks is to determine whether the patient is sick.

One of the outcomes can be a correct determination that disease is present and the patient is sick. Another outcome can be that there is no disease and the patient is healthy.

The concern is that either diagnosis can be accurate, or true, or inaccurate, or false. For example, the doctor could miss the signs of disease and make the incorrect determination that the patient is well when they are in fact sick. Another possible error is to rule that a patient is sick when that patient is in fact healthy. False diagnoses are either costly or dangerous.

In network security analysis, the cybersecurity analyst is presented with an alert. This is similar to a patient going to the doctor and saying, “I am sick.” The cybersecurity analyst, like the doctor, needs to determine if this diagnosis is true. The cybersecurity analyst asks, “The system says that an exploit has occurred. Is this true?”

True Positive: The alert has been verified to be an actual security incident.
False Positive: The alert does not indicate an actual security incident. Benign activity that results in a false positive is sometimes referred to as a benign trigger.

An alternative situation is that an alert was not generated. The absence of an alert can be classified as:

True Negative: No security incident has occurred. The activity is benign.
False Negative: An undetected incident has occurred.

When an alert is issued, it will receive one of four possible classifications
	True	False
Positive (Alert exists)	Incident occurred	No incident occurred
Negative (No alert exists)	No incident occurred	Incident occurred
Note: “True” events are desirable. “False” events are undesirable and potentially dangerous.

True positives are the desired type of alert. They mean that the rules that generate alerts have worked correctly.

False positives are not desirable. Although they do not indicate that an undetected exploit has occurred, they are costly because cybersecurity analysts must investigate false alarms; therefore, time is taken away from the investigation of alerts that indicate true exploits.

True negatives are desirable. They indicate that benign normal traffic is correctly ignored, and erroneous alerts are not being issued.

False negatives are dangerous. They indicate that exploits are not being detected by the security systems that are in place. These incidents could go undetected for a long time, and ongoing data loss and damage could result.

Benign events are those that should not trigger alerts. Excess benign events indicate that some rules or other detectors need to be improved or eliminated.

When true positives are suspected, a cybersecurity analyst is sometimes required to escalate the alert to a higher level for investigation. The investigator will move forward with the investigation in order to confirm the incident and identify any potential damage that may have been caused.

This information will be used by more senior security personnel who will work to isolate the damage, address vulnerabilities, mitigate the threat, and deal with reporting requirements.

A cybersecurity analyst may also be responsible for informing security personnel that false positives are occurring to the extent that the cybersecurity analyst’s time is seriously impacted. This situation indicates that security monitoring systems need to be tuned to become more efficient. Legitimate changes in the network configuration or newly downloaded detection rules could result in a sudden spike in false positives as well.

False negatives may be discovered well after an exploit has occurred. This can happen through retrospective security analysis (RSA). RSA can occur when newly obtained rules or other threat intelligence is applied to archived network security data. For this reason, it is important to monitor threat intelligence to learn of new vulnerabilities and exploits and to evaluate the likelihood that the network was vulnerable to them at some time in the past.

In addition, the exploit needs to be evaluated regarding the potential damage that the enterprise could suffer. It may be determined that adding new mitigation techniques is sufficient, or that a more detailed analysis should be conducted.

Action Point
PS: If you would like to have an online course on any of the courses that you found on this blog, I will be glad to do that on an individual and corporate level, I will be very glad to do that I have trained several individuals and groups and they are doing well in their various fields of endeavour. Some of those that I have trained includes staffs of Dangote Refinery, FCMB, Zenith Bank, New Horizons Nigeria among others. Please come on Whatsapp and let’s talk about your training. You can reach me on Whatsapp HERE. Please note that I will be using Microsoft Team to facilitate the training.

I know you might agree with some of the points that I have raised in this article. You might not agree with some of the issues raised. Let me know your views about the topic discussed. We will appreciate it if you can drop your comment. Thanks in anticipation.

Fact Check Policy

CRMNIGERIA is committed to fact-checking in a fair, transparent and non-partisan manner. Therefore, if you’ve found an error in any of our reports, be it factual, editorial, or an outdated post, please contact us to tell us about it.

Fact Check Policy